» IV. Konferencia kiadványok

Nemzetközi idegen nyelvű konferencia lektorált kiadványa

  1. Dudás, I.: Grinding of worm having arched profile, Publication of 3rd Conference on Gears, Budapest, 1974. pp.: 61-65.
  2. Dudás, I.: Production geometrical questions of cutting tools used for machining worm drives having arched profile, Proceedings of the 4th Colloquium on Tools and Tool Materials, Miskolc, 09. 01. – 31. 08. 1978. p.: 1-18.
  3. Dudás, I.: Determination of contact line and enveloping tool surface at machining of helicoid surfaces, 5th Conference on Tools and Tool Materials, Miskolc, 24-27. 08. 1982. GTE, II. 15.1/1-15/ p.: 13.
  4. Dudás, I.: Production geometrical questions of spiroid drives, Correferatum prepared for the assembly of sub-committee of Power Transmissions of Machine Design Committee of Technical Sciences Department of MTA Budapest, 1986. 05. 29.
  5. Dudás, I.: Manufacturing and Qualification of Drives With Good Efficiency and High Load Capacity, Department of Production Engineering Technical University for Heavy Industry, 1986. június 16-18. pp.: 155-167., 1-st. International Conference-Reliability and Durability of Machines and Machinery Systems in Mining, 1986. június 16-18. Szozyrk, Seria Görnictwo. z. 143, Poland
  6. Dudás, I.: Geometrisch richtige Herstellung von Schraubenfläche, IX. Nauhowa Szkola Obrobki Sciernej Krakow Wrzesien, 1986 pp.: 81-86.
  7. Dudás, I.: Die Analyse der Werkzeug- und Fertigungsgeometrie von Spiroidgetrieben, 7. Vortragstagung Fertigung und Gütsicherung im Zahnradgetrichbeban, Magdeburg, 86. IX. 24-25, pp.: 215-221.
  8. Dudás, I., Fridrik L.: – Pap Józsefné:Fertigbearbeitung von Verzahnungen mit superharten Werkzeugen, 7. Vort-ragstagung Fertigung und Gütesicherung im Zahnradgetriebebau, Magdeburg, 86. pp.: 125-129, 1986. szept. 24-25.
  9. Dudás, I.: Schleifen von Verzahnungen mit superharten Werkzeugen, X. Naukowa Szkola Obróbki Sciernej, Wroclaw, 1987. 09. 16-20, pp.: 204-207.
  10. Dudás, I., Bányai K.: Bestimmung der Formgenauigkeit von Sneckenoberflächen mit Koordinaten-messmashine, VII. Oberflachenkoll mit internationaler Beteiligung Karl-Marx-Stadt 1988.
  11. Dudás, I.: Korrekte Abwälzfräser zur korrekten Scknecken, Nass ’88. II. Werkzeug-konferenz, Koszalin, 1988. V. pp.: 26-29., . ISSN 0860-0325 pp.: 289-298.
  12. Dudás, I., Fridrik L., Nagy S., Szabó S., Vadász D.: Modular Tool-suppling sudsystem for flexible manufacturing systems, (, 7-th Brazilian Conference on Automatic Control, Sád José dos Campos, SP. August 15-19, 1988.
  13. Dudás, I.: Design and Manufacturing of Helicoid Surfaces and Their Tools Using a CAD/CAM  System, International Conference on Engineering, DESIGN ICED ’88, Bp. 23-26. VIII. 1988. pp.: 8. Volumen 2. p. 214.
  14. Dudás, I.: Problem und Lösung zur Schleifen von Kegelschraubenflächen, 11th Interna-tional Symposium on Abrasive Machining, Poland, Lodz 19-22. Sept., l988. p.: 7.
  15. Dudás, I.: Herstellung von Helicoidflächen und – Werkzeugen untersuchung eines CAD/CAM Systems., III. Intersymposium „Untersuchung von Werkzeugen ’88”, Krakow 13-15. 10. 1988 Krakow-Muszyna
  16. Dudás, I.: Herstellung von Helikoidflächen und Werkzeugen. Untersuchung einers CAD/CAM Systems, III. Intersymposium, „Untersuchung von Werkzeugen ’88” Krakow, 1988 pp.: 32-36.
  17. Dudás, I.: Problem und Lösung beim Schleifen von Kegelschraubenflächen, XI. Navkowa szkola Obróbki sciernej Lódz, 19-22. Wrzesieu 1988, pp.: 163-170.
  18. Dudás, I.: CAD/CAM system for geometrically exact manufacturing of helicoid surfaces, ICED 90 Dubrovnik, Proceedings of ICED’90 – Volume 4, 28-31. August.1990. pp.: 1839-1846.
  19. Dudás, I., Horváth L., Cser I.: Entwurf von Ersatzteilherstellungsprozessen von CAD Produktmodell aus-gegangen, 3. Internationales Symposium von DAAM Technische Universität – Budapest Ungarn, 4-6. November 1992. pp.: 47-48.
  20. Dudás, I.: Integration as an essential aspect of the future CAPP Systems OSN’92 International Symposium Politechnika Krakowska pp.: 37-44.
  21. Dudás, I.: Qualification of CNC grinding wheel dressing equipment Production Engineering, 1993. 05-06., pp.: 219-223.
  22. Dudás, I.: CAD and CAM of spiroid worms and hobs International Symposium New developments in gear geometry 15-18. June. 1993. Izhevsk, Russia
  23. Dudás, I.: Introduction VIIIth International Conference on Tools, University of Miskolc, Hungary 30. Aug.- 1. Sept. 1993. , pp.: V. – VI., ISBN 963 661 215 3
  24. Dudás, I., Csermely T., Varga Gy.: Computerized Metrology of Experiments Done by Single Point cutting Tools, VIIIth International Conference on Tools, Miskolc, Aug. 30. – Sep. 01., 1993, pp.: 519-526.
  25. Dudás, I., Grabtschenko A. I.: Erfahrungen der Zusammenarbeit zwischen dem Lehrstuhl für Maschinenbautechnologie der Miskolcer Universität und dem Lehrstuhl für Materialzerspanung und Zerspanungswerkzeuge der Charkower Technischen Universität. VIII. Internationale Werkzeugkonferenz, Universität Miskolc, Ungarn Miskolc, 30. Aug. – 1. Sept. 1993. pp.: 268-272.
  26. Dudás, I.: Genaue-Abwalzfräser für genaue Schnecken VIII. Internationale Werkzeugkonferenz, Universität Miskolc, Ungarn Miskolc, 30. August – 1. September 1993. pp.: 379-388.
  27. Dudás, I.: Zur Herstellung von Schraubenflächen allgemeines mathematisches Modell sowie Fertigungssystem VIII. Internationale Werkzeugkonferenz, Universität Miskolc, Ungarn; Miskolc, 30. August – 1. September 1993. pp.: 389-399.
  28. Dudás, I.: Application of coordinate measuring technique for qualification of helicoid surfaces VIIIth Internatonal Conference on Tools University of Miskolc, 31. 08. – 01. 09. 1993. pp.: 400-408.
  29. Dudás, I., Csermely T.: Kontinuierliches Abrichten von profilierten Schleifscheiben durch CNC-Steuerung VIII. Internationale Werkzeugkonferenz, Universität Miskolc, Ungarn Miskolc, 30. August – 1. September 1993. pp.: 510-518.
  30. Dudás, I., Berta M., Cser I: Lösungen zur Werkzeugauswahlen den rechnergestützten Systemen der Fertigungsplanung, VIII. Internationale Werkzeugkonferenz, Universität Miskolc, Ungarn, Miskolc, 30. August – 1. September 1993. pp.: 654-662.
  31. Dudás, I. Szabó S.: Computergestützte Steuerung des Werkzeugflusses zerspanender Fertigungs-systeme, VIII. Internationale Werkzeugkonferenz, Universität Miskolc, Ungarn, Miskolc, 30. August – 1. September 1993. pp.: 663-669.
  32. Dudás, I.: Herstellung von Schraubenflächen im Automatisierten System, 4. Internationales DAAAM Symposium, Technische Universität Brno – Tschec-hien, 16.-18. September 1993. pp.: 71-72.
  33. Dudás, I. Csermely T. – Varga Gy:The application of metrology for testing of dimensioning models, 4. Internationales DAAAM Symposium, Technische Universität Brno – Tschec-hien, 16 – 18. September 1993. pp.: 73-74.
  34. Dudás, I.- Berta M. –Cser I.:Szosztojanie i problemi razvitija CAPR proizvodctvennih processzov, INTERPARTNER ’93 Harkov, 4-8. Okt. 1993.
  35. Dudás, I.:Izgotovlenie szpiroidnih peredacs INTERPARTNER ’93 Harkov, 4-8. Okt. 1993.
  36. Dudás, I. Bajáky Zs.:Masurarea suprafetelor elicoidale cu ajutorul masinilor de masurat in coordonate, MTM’93. CUGIR-ROMÁNIA 1993. octombrie 14-16. pp.: 132-135.
  37. Dudás, I.- Grabchenko A. I. -Verezub N. V- Horváth M..:High Technologies in Manufacture Engineering International Conference, Polytechnical University of Kharkov and University of Miskolc. Miskolc, 2. March 1994. pp.: 31-36. ISBN 963 661 2382
  38. Dudás, I., Berta, M.- Cser, I.: The Trends of the Development and the Application of Computer Aided Production Process Planning International Conference, Polytechnical University of Kharkov and University of Miskolc. Miskolc, 2. March 1994. pp.: 13-19. ISBN; 963 661 2382
  39. Dudás, I., Berta, M.- Cser, I.: Possibilities of microCAD’s in production planning 18. Kolloquium zur Konstruktionstechnik 10-13th, May, 1994, Zakopane, Poland, pp.: 173-179.
  40. Dudás, I.: Rächerunterstütztes Konstruieren von Zerspannungswerkzeugen Wybrane problemy projektorawania procesow technologicznych, Politechnika Gdanska, 1994. május 26-27., pp.: 24-31
  41. Dudás, I.: Rechnerunterstützte Planung der Technologischen Prozesse Technologia Obrobki Wykanczajacej (Sympozjum), Politechnika Gdanska 1994. május. 30, pp.: 5-11.
  42. Dudás, I.: The application of coordinate measuring technics for qualifying of helicoidal surfaces, Viszókije Technológii, Harkov – HGPU – Alusta, 1994. p.: 68.
  43. Dudás, I., Berta M., Cser I.: Production of rotational parts in small-series and computer aided planning of its production engineering Viszókije Technológii, Harkov – HGPU – Alusta, 1994. p.: 69.
  44. Dudás, I., Csermely T., Varga, Gy.: Computer aided measurement technic of experiments performed by tools with defined geometry, Proceedings of the Joint Hungarian – British International Mechatronics Conference, ISBN: 1 85312 367 6, ISBN: 1 56252 291 4, Budapest, 21-23th September 1994, pp.: 35-41.
  45. Dudás, I., Bányai K.: Manufacturing of helical surfaces in flexible production system Singapore, 8-11. November 1994. pp.: 1036-1038.
  46. Dudás, I., Bányai, K.: Qualitätssicherung der Schneckenflächen im flexiblen Fertigungssystem Qualitätssicherungssysteme im Maschinenbau Krakow, Poland, 7-28. October 1994, pp.: 45-51.
  47. Dudás, I., Csermely T., Varga, Gy.: Die elektrische Regelung von DHLC Drahtziehmaschinenreihen Donau Adria Assoziation für Automation und Messtechnik – DAAAM, WIEN, ÖSTER-REICH – 5. Internationales DAAAM Symposium 27-29. October 1994., pp.: 105-106., Maribor, Slowenien
  48. Dudás, I.: Constructional and manufacturing standpoints for appropriate production of helicoid surfaces Donau Adria Assosiation für Automation und Messtechnik – DAAAM, WIEN, ÖSTERREICH – 5. Internationales DAAAM Symposium 27-29. October 1994., Maribor, Slowenien; pp.: 103-105.
  49. Dudás, I., Varga, Gy.: Forming of Driving Pair Bearing Patterns for Worm Gears 4th International Tribology Conference – AUSTRIB’94 5-8. December 1994., Volume II., pp.: 705-709., Perth, Australia
  50. Dudás, I., Bányai K.: Automatized Geometrical Qualification of Helicoidal Surfaces Proceedings of the Thirty-first International Matador Conference, Manchester, 20th-21st April, 1995, pp.: 333-337.
  51. Dudás, I., Varga Gy.: Up-to-date Method for Design and Production of Worm Driving Pairs Proceedings of the Thirty-first International Matador Conference, Manchester, 20th-21st April, 1995, pp.: 579-583.
  52. Dudás, I., Varga Gy.: Environment clean – with minimum volume of coolants – drilling TOP 95. Pozsony (Bratislava) 1995. június 27. pp.: 191-196.
  53. Dudás, I.: Environment friend machining technology – Drilling MteM’95 Kolozsvár (Cluj-Napoca) 1995. október 10-14.
  54. Dudás, I., Bajáky Zs.: Verificarea geometreie suprafetelor elicoidale pemasini de masuratin 3D MteM’95 Kolozsvár (Cluj-Napoca), 1995. október 10-14. pp.: 225-228.
  55. Dudás, I., Bányai K.: Manufacturing Of Helical Surfaces By CNC Thread Grinder MTeM ’95 Kolozsvár (Cluj-Napoca), 1995. október 10-14.
  56. Dudás, I., Csermely T.: Die Qualitätssicherung von erzeugnissen Mittels der digitalen Messtechnik 6. Internationales DAAAM Symposium, Technische Universitat Krakow-Polen 1995. október 26-28. , pp.: 81-82.
  57. Dudás, I., Varga Gy.: Dynamic modeling of transverse drill bit vibration at environment clean drilling 6th International DAAAM Symposium, Technical University of Krakow-Poland 1995. október 26-28. , pp.: 83-84.
  58. Dudás, I., Varga, Gy., Bányai, K.: Bearing Pattern Localization of Worm Gearing. VDI-Gesellschaft Entwicklung Konstruktion Vertrieb, International Conference on Gears Tagung Dresden, 22-24. April 1996, pp.: 427-441.
  59. Dudás, I.: Introduction IX. th International Conference on Tools, University of Miskolc, Hungary 3-5. Sept. 1996. pp.: VI. , ISBN 963 661 215 3
  60. Dudás, I.: Hoch- und Spitzentechnologien der Fertigungstechnik, Entwicklungsstand und Perspektiven, IX. Internationale Werkzeugkonferenz, Universität Miskolc, Ungarn, 3-5. September 1996. , pp.: 33-52.
  61. Dudás, I., Csermely, T.: Schwingungsanalyse von Bohrwerkzeugen IX. Internationale Werkzeugkonferenz, Universität Miskolc, Ungarn, 3 – 5. September 1996., pp.: 269-276.
  62. Dudás, I., Su, D.: Development of an Intelligent Integrated System Approach for Design and Design and Manufacture of Worm Gears IX.th International Conference on Tools, University of Miskolc, Hungary 3-5. Sept. 1996. pp.: 399-406.
  63. Dudás, I.: Developing of production of elements of spiroid gearing IX. th International Conference on Tools, University of Miskolc, Hungary 3-5. Sept. 1996., pp.: 427-434.
  64. Dudás, I.: Umweltfreundliche Bohrtechnologien IX. Internationale Werkzeugkonferenz. Universität Miskolc, Ungarn, 3-5. September 1996., pp.: 509-522.
  65. Dudás, I., Szabó S.: Merkmale des Werkzeugflusses bei zerspandenen Herstellungssystemen IX. Internationale Werkzeugkonferenz, Universität Miskolc, Ungarn 3-5. September 1996. , pp.: 775-782.
  66. Dudás, I.- Bányai K.-Varga Gy.Simulation of Meshing of Worm Gearing, The 7th International Power Transmission and Gearing Conference, San Diego, California, USA, October 6-9., 1996, pp.: 141-146.
  67. Dudás, I.- Varga Gy.:The Use of Factorial Experiment Design Method for Choosing the Proper Cutting Parameters, 7th International DAAAM Symposium, Vienna, Austria, 17-19. October 1996, pp.: 453-454.
  68. Dudás, I.: Intelligent Techniques for Design and Manufacturing of Worm Gearings The Second World Congress on Inteligent Mafacturing Process & Systems Budapest, Hungary, June 10-13, 1997 pp.: 430-438.
  69. Dudás, I., Varga, Gy.: Application of Factorial Experiment Design Method for Analysis of Worm Gearing, MTM ’97, International Conference on Mechanical Transmissions and Mechanisms, Tianjin, China, July 1-4., 1997, pp.: 625-629.
  70. Dudás, I., Tolvaj I., Varga Gy.: Analysis of Tool and Production Geometry in Case of Environmentally Clean Manufacturing, Proceedings of the 8th International DAAAM Symposium, ICCU, Dubrovnik, Croatia, 23-25th October, 1997, pp.: 71-72.
  71. Dudás, I. Szabó O.- Gurzó J.:Temperature Variation Due to the Sliding of Atomic Planes at Microcutting 4th International Colloquium – Mikro – und Nanotechnologie, TU Wien, November 26., 1997. pp.: 41-46.
  72. Dudás, I. Su D.- Bányai K.:Intelligent integration in manufacture of worm gears. V. Miedzynarodowe Sympozjum OSiN’ 97 Krakow-Krynica 4-6. XII. 1997, pp. 56-61.
  73. Dudás, I. -Varga Gy:Vibration Analysis of Twist Drills, 6th International Scientific Conference „Achivements in the Mechanical & Materials Engineering”, AMME’97, GLIWICE-WISLE, Miskolc-Tapolca, 1-3. December, 1997, pp.: 76-79.
  74. Dudás, I.- Varga Gy.:Analysis of Environment Friend Drilling Technologies, „Achivements in the Mechanical & Materials Engineering”, AMME’97, GLIWICE-WISLE, Miskolc-Tapolca, 1-3. December, 1997, pp.: 88-91.
  75. Dudás, I.- Bányai K.:Possibility of application of expert systems, on the field of worm drives An International Meeting of the Production and Operations Management Society, Graduate School of Business, University of Cape Town, South Africa, 29 June – 02 July 1998. pp.: 68-74.
  76. Dudás, I. -Varga Gy: Up-to-date Analysis of Environment Friend Manufacturing Technologies, An International Meeting of the Production and Operations Management Society, Graduate School of Business, University of Cape Town, South Africa, 29 June – 02 July 1998. pp.: 75-79.
  77. Dudás, I.- Varga Gy.: Use Factorial Experiment Design for Environment Clean Drilling Experiments, Proceedings of the Sixth IASTED International Conference, Banff, Canada, July 26-29., 1998. pp.: 89-91.
  78. Dudás, I. –Varga Gy.- Leskó B.: Experimental Examinations of Sliding Burnishing – As a Finishing Manufacturing Operation – for External Cylindrical Surfaces Proceedings of the Sixth IASTED International Conference, Banff, Canada, July 26-29., 1998. pp.: 165-168.
  79. Dudás, I.:Possibility of Application of Expert Systems on the Field of Worm Drives Proceedings of the Sixth IASTED International Conference, Banff, Canada, July 26-29., 1998. pp.: 173-176.
  80. Dudás, I., Bányai K.: Measurement of worm gearing for 3D measuring machine Fourth International Symposium on Measurement Technology and Intelligent Instruments, Miskolc, Lillafüred, Hungary, Sept. 2-4., 1998. pp.: 207-211.
  81. Dudás, I., Lierath, F..: The modern measuring technique as the device of the effective quality assurance of the machine production Fourth International Symposium on Measurement Technology and Intelligent Instruments, Miskolc, Lillafüred, Hungary, Sept. 2-4, 1998. pp.: 465-473.
  82. Dudás, I., Tolvaj, I., Varga, Gy., Csermely T.: Measurements applied at the experiments of environmentally clean drilling manufacturing operations, Fourth International Symposium on Measurement Technology and Intelligent Instruments, Miskolc, Lillafüred, Hungary, Sept. 2-4., 1998. pp.: 487-492.
  83. Dudás, I. Csermely T.: Vibration Analysis of Drilling Tools Fourth International Symposium on Measurement Technology and Intelligent Instruments, Miskolc, Lillafüred, Hungary, Sept. 2-4, 1998. pp.: 499-503.
  84. Dudás, I., Balyáky, Zs.: Qualification of Worms Gears in CAD/CAM Systems 6th IMEKO SYMPOSIUM „Metrology for Quality Control in Production”, Vienna, Austria, Sept. 8-10., 1998. pp.: 149-155.
  85. Dudás, I., Bányai, K.: Simulation of Meshing of Worm Gearing High Technologies of Machine-Building Kharkov, 1998. pp.: 101-103.
  86. Dudás, I.:Simulation of Meshing of Worm Gearing Technologia Obróbki Wykanczajacej, Materialy IV Seminarium, Gdansk, Sept. 25-27., 1998. pp.: 22-28.
  87. Dudás, I. . Szabó O.- Gurzó J.:Weggleiten von Atomschichten Infolge der Temperaturänderung Während der Mikrozerspanung Technologia Obróbki Wykanczajacej, Materialy IV Seminarium Gdansk, Sept. 25-27., 1998. pp.: 48-55.
  88. Dudás, I.:Intelligent Techniques for the Design and Manufacturing of Worm Gearings International Conference on Manufacturing Systems Bucharest, Romania, 14-15. October 1998. pp.: 45-54.
  89. Dudás, I. Bányai Károly: Development of Universal Thread Grinding Machine XIIIth Conference on Machine Tools University of Miskolc, 26-27. October 1998. pp.: 105-111.
  90. Dudás, I.: Herstellung von schraubenflächen im automatischem system Festschrift zum 60. Geburtstag von Prof. Dr. Ing. Habil. Dr. h. c. mult. Friedhelm Lierath, Magdeburg, Germany, Mai 1998.
  91. Dudás, I.: Operation Planning and Simulation of Machining on Turning Centres Asian Industrial Technology Congress’99., Hong Kong, 26-29. April 1999.
  92. Dudás, I. Csermely T.:Diagnostical expert system von werkzeugen The 10th INTERNATIONAL DAAAM SYMPOSIUM Vienna University of Technology, Vienna, Austria, 21-23 th October 1999.
  93. Dudás, I., Varga Gy.: Up-to-date metrology for effective quality assurance of the machine production V ICIE – International Congress of Industrial Engineering Brazí-lia, Rio de Janeiro Nov. 1-4., 1999.
  94. Dudás, I.: Analysis of Drilling when Environmentally Conscious Manufacturing, EP99 Engenharia de Producao, XIX ENEGEP Conference, V ICIE – International Congress of Industrial Engineering, Rio de Janeiro, Brazil, 01 a 04 de No-vembro, 1999, pp.: 210-215.
  95. Dudás, I., Varga Gy., Leskó, B.: Examinations of Sliding Burnishing for Finishing Operation of External Cylindrical Surfaces, Huddersfield
  96. Dudás, I., Csermely, T.: Application of Electrical Metrology Methods for Examinations of Machine Tools XVI. IMEKO World Congress, Wien, Austria, 2000.
  97. Dudás, I. Varga, Gy.: The use of CCD cameras in production engineering of sophisticated engineering surfaces The 28th Israel Conference on Mechanical Engineering Ben-Gurion University of the Negev Beer-Sheva, Israel, 14-15. June, 2000.
  98. Dudás, I., Varga, Gy.: Analysis of environmentally conscious manufacturing technologies The 28th Israel Conference on Mechanical Engineering Ben-Gurion University of the Negev Beer-Sheva, Israel, 14-15. June, 2000.
  99. Dudás, I.: Intelligent Automation of Design and Manufacture of Worm Gear Drives Proceeding of the Tenth International Conference on Tools Miskolc, Hungary, 6-8. September, 2000. pp.: 37-43.
  100. Dudás, I., Szirtes, T., Bányai, K.: Examination of the Efficiency of a Worm Drive by Dimensional Analysis Proceeding of the Tenth International Conference on Tools Miskolc, Hungary, 6-8. September, 2000. pp.: 45-51.
  101. Dudás, I., Csermely, T.: Examination Dynamic Features of Machine Tools in These Days Proceeding of the Tenth International Conference on Tools Miskolc, Hungary, 6-8. September, 2000. pp.: 53-58.
  102. Dudás, I., Csermely, T.: Werkzeuge und Werkzeugsmaschinen QM-Systeme von Maschienenbau-technologie Proceeding of the Tenth International Conference on Tools Miskolc, Hungary, 6-8. September, 2000. pp.: 59-63.
  103. Dudás, I., Varga Gy.: Intelligent Manufacturing System for Production of Helicoid Surfaces Proceeding of the Tenth International Conference on Tools Miskolc, Hungary, 6-8. September, 2000. pp.: 127-132.
  104. Dudás, I., Szabó S., Varga Gy.: Planning of Tool-Flow Nowadays Proceeding of the Tenth International Conference on Tools Miskolc, Hungary, 6-8. September, 2000. pp.: 159-165.
  105. Dudás, I., Varga, Gy.: The Possibility of the Use of CCD Camera for Manufacturing of Precision Surfaces Proceeding of the Tenth International Conference on Tools Miskolc, Hungary, 6-8. September, 2000. pp.: 291-296.
  106. Dudás, I.: Anwendungsgebieter Umweltfreundlicher Technologien In Der Maschinen-bau-industrie Proceeding of the Tenth International Conference on Tools Miskolc, Hungary, 6-8. September, 2000. pp.: 325-331.
  107. Dudás, I. Varga, Gy.: Examinations of Sliding Burnishing Using for Improving the Surface Quality of External Cylindrical Surfaces, 15th World Conference on Non-Destructive Testing, Roma, Italy, 15-21. October, 2000. Abstract Book: p.: 237., and 5 pages on CD Proceeding.
  108. Dudás, I., Bányai, K.: Optimization of generation of helicoidal surfaces The International Conference on Mechanical Transmissions (ICMT’2001) April 5-9., 2001, Chongqing University, Chongqing, P.R. China, pp.: 313-317.
  109. Dudás, I., Bányai, K.: Planning of Optimum Mating and Grinding of Helicoid Surfaces International Multidisciplinary Conference, May 25-26., 2001., Baia Mare, pp.: 60-65.
  110. Dudás, I.: Measurement of tool profiles by CCD cameras 5th ISMTII – International Symposium on Measurement Technology and Intelligent Instruments Sept. 25-29., 2001. Giza – Cairo, Egypt, pp.: 91-96.
  111. Dudás, I.: Production of Helicoid Surfaces in Intelligent Systems, 5TH International MTeM Symposium Cluj-Napoca October 4-6., 2001, Cluj-Napoca, Romania, pp.:177-182.
  112. Dudás, I., Varga Gy., Bányai K.: Grinding Wheel profil measurement by CCD camera Annals of DAAM for 2001 & Proceedings of the 12th International DAAAM Symposium 24-27th October 2001., Jena, Germany, pp.: 117-118.
  113. Dudás, I., Varga Gy., K. J. Stout.: 3D Analysis of Surfaces Machined by Environmentally Conscious Way, Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium, Wienna, Austria, 23-26th October, 2002, pp.: 585-586.
  114. Dudás, I. Bányai K.-:New Production Geometry of Modified Spiroid Drives, Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium, Wienna, Austria, 23 – 26th October, 2002, pp.: 145 – 146.
  115. Dudás, I.: New Production Geometrical Properties of Spiroid Gearing, Doktoranduszok Fóruma, Miskolc, 2002. november 5-6-7., Gépészmérnöki Kar Szekció-kiadványa, pp.:32-37.
  116. Dudás, I., Gyenge Cs.: Analysis of LOM type rapid-prototype system, Materialy VI Miedzynarodowego Seminarium Proceedings of the 6th Internetional Seminar, Technologia Obróbki Wykanczajacej Finishing Machining, Gdansk, 16. 12. 2002.
  117. Dudás, I.: The Use of CCD Cameras in Mechatronics. Proceedings of WESIC 2003, Univeristy of Miskolc, Hungary, 28-30. May, 2003. pp. 397-404. ISBN 963 661 570 5
  118. Dudás, I.: Intelligent Automation of Production of Worm Gear Drives, Annals of MteM for 2003 & Proceedings of the International MteM Conference Published by MteM 2003, Cluj-Napoca, Romania, (Editor Csaba Gyenge)
  119. Dudás, I.: Production Geometry and Manufacturing of Helicoids, II. Sympozjum – Wybrane problemy Projektrowania Procesów Technologicznycs, Sopot 18-19. maja 2004, pp.:49-60. ISBN 83-88579-85-1
  120. Dudás, I., Varga, Gy., Bányai, K.: The use of holonic manufacturing system for production of worm driving pairs, Research and Education, For the 40 years jubilee of the cooperation between the National Technical University „Kharkiv Politechnic Institute” and the University of Miskolc, Harkov, 2004., pp.: 99-106. ISBN 966-593-337-X
  121. Dudás, I.: Unyifikácija operátorov i elementov otobrazsényija prosztranszva pri 3 D modelliroványija rézsusih insztrumentov, Research and Education, For the 40 years jubilee of the cooperation between the National Technical University „Kharkiv Politechnic Institute” and the University of Miskolc, Harkov, 2004., pp.: 169-174. ISBN 966-593-337-X
  122. Dudás, I.: Intelligent Automation of Production of Worm Gear Drives, Annals of MTeM for 2003 & Proceedings of the 6th International Conference Modern Technologies in Manufacturing, Published by MTeM 2-4. October 2003. Cluj-Napoca, Romania
  123. Varga, Gy., Dudás, I.: Tribological and Environmental Examinations of Dry Machining Processes, Proc, of the 2nd Int. Conf. of „Research and Education” results of the scientific cooperation between the National Technical University „Kharkiv Polytechnic Institute” and the University of Miskolc, Miskolc, 2004, March 17-19, pp.: 193-201. ISBN 963 661 607 8
  124. Dudás, I., Gyenge, Cs.: Analysis of lom type rapid-prototype system, Materialy VI Miedzynarodowego Seminarium Proceedings of the 6th Internetional Seminar, Technologia Obróbki Wykanczajacej Finidhing Machining, Gdansk, 16. 12. 2002.
  125. Dudás, I.: Production Geometry and Manufacturing of Helicoids, II. Sympozjum – Wybrane problemy Projektrowania Procesów Technologicznycs, Sopot 18-19 maja 2004, pp.:49-60.ISBN 83-88579-85-1
  126. Dudás, I., Varga, Gy., Bányai, K.: Holonic Manufacturing System for Production of Different Sophisticated Surfaces. Proceedings of the Fourth IASTED International Conference on Modelling, Simulation, and Optimization, held August 17-19, 2004. Kauai, Hawaii, USA, pp.:72-75. ISBN: 0-88986-424-1, ISSN: 1021-8181.,
  127. Varga, Gy., Dudás, I.: Modelling and Examinations of dry Machining Processes. Proceedings of the Fourth IASTED International Conference on Modelling, Simulation, and Optimization, held August 17-19, 2004. Kauai, Hawaii, USA, pp.:327-331. ISBN: 0-88986-424-1, ISSN: 1021-8181.
  128. Bányai, K, Dudás, I.: Modifikált spiroid hajtópárok kapcsolódásának vizsgálata, Dokotoranduszok Fóruma, Miskolc, 2004. november 9. pp.:15-20.
  129. Dudás I., Dudás N., Felhő Cs., Varga Gy.: Medical Application of rapid Prototyping. MicroCAD 2005, Proceedings of International Scientific Conference, Supplementary Volume, Manufacturing Sysgtems, March 10-11, 2005., University of Miskolc, Miskolc, Hungary, pp.: 37-42, ISBN 963 661 646 9 0
  130. Dudás, I., Vargy, Gy.: 3D Topography for Enviromentally Friendly Machined Surfaces, 7th International Symposium Series on Measurement Technology & Intelligent Instruments 6-8 September 2005. Huddersfield, UK; ISMTII 2005., pp.:103-106.
  131. Dudás I. – Varga Gy.: 3D Topography for Environmentally Friendly Machined Surfaces Journal of Physics: Conference Series 13, 2005., pp.: 24-27., Institute of Physics Publishing, doi: 10.1088/1742-6596/13/1/006
  132. Varga, Gy., Balajti, Zs., Dudás, I.: Advantages of the CCD Camera Measurements for Profile and Wear of Cutting Tools. 7th International Symposium Series on Measurement Technology & Intelligent Instruments 6-8 September 2005. Huddersfield, UK; ISMTII 2005., pp.:271-274.
  133. Dudás, I.: Production Engineering int he 21th century, Anmals of MTeM for 2005 & Proceedings of the 7th International MTeM Conference Modern Technologies in Manufacturing 6th-8th October 2005, Cluj-Napoca, Romania, pp..:1-8.
  134. Dudás, I. Bányai K.: Examination of Mashing of Modificated spiroid Driving Pairs, 9th International Research/Expert Conference „Trend sin the Development of Machinery and Associated Technology” TMT 2005, Antalya, Turkey, 26-30 September, 2005., p.:981-984.
  135. Dudás, I., Balajti Zs.: Modelling a Development of the new Method for Describing the Bearing Pattern of the Spiroid Driving, 9th International Research/Expert Conference „Trend sin the Development of Machinery and Associated Technology” TMT 2005, Antalya, Turkey, 26-30 September, 2005., p.:985-988.
  136. Dudás, I.- Balajti Zs.-Bányai K.-:Exact Production of Helicoid Surfaces, III. International Congress of Precision Machining Vienna-Austria (ICPM 2005), October 18-19. 2005., pp.:27-32
  137. Dudás, I.: Modelling and Medical Applications of Rapid Prototyping, Proceedings of the International Scientific Conference „Innovation and Utility in the Visegrad Fours”Volume 3.(Agricultural and Mechanical Engineering) Nyíregyháza, Hungary, October 13-15, 2005. pp.:617-622. ISBN 963 86918 0 8 Ö, ISBN 963 86918 2 4
  138. Dudás, I. Lierath F.:High Technologies Rules the Perspective Development of Production Technology Case Studies for Micro-, Nano-, Laser- and Computer-Technologies, Proceedings of the International Scientific Conference „Innovation and Utility in the Visegrad Fours”Volume 3.(Agricultural and Mechanical Engineering) Nyíregyháza, Hungary, October 13-15, 2005., pp.:653-660   ISBN 963 86918 0 8 Ö, ISBN 963 86918 2 4
  139. Dudás, I.-Balajti Zs.:Modelling and develpoment for describing the bearing pattern of the spiroid driving, Proceedings of the Sixth IASTED Internetional Conference on ”Robotics and Applications, 2005. október 31. – november 02. 2005., Cambridge, USA, pp.:203-208 ISBN 0-88986-521-3
  140. Dudás, I., Bányai K: Development of the Universal Thread-Grinding Machine. 10th International Research/Expert Conference „Trend sin the Development of Machinery and Associated Technology”, TMT 2006, Barcelona Lloret de mar, Spain, 11-15 September, 2006., pp.: 229-232. ISBN 9958-617-30-7
  141. Dudás, I., Balajti Zs.: Analysing of Helicoid Surfaces Having the Same axis by Mathematical Model. 10th International Research/Expert Conference „Trend sin the Development of Machinery and Associated Technology”, TMT 2006, Barcelona Lloret de mar, Spain, 11-15 September, 2006., pp.: 965-968. ISBN 9958-617-30-7
  142. Dudás, I., Felhő Cs., Zsoldos G.: Rapid Prototyping and Medical Prostheses Manufacturing Research at the University of Miskolc. Rapid Prototype alkalmazása az orvostudományban. MTA Debreceni Területi Bizottsága, Debrecen, 2006. október 13.
  143. Balajti, Zs., Dudás, I.: New Model for the Production Geometrical Analysis of Spatial Drives, microCAD 2006. International Scientific Conference Miskolc, 16-17. March 2006., pp. 1-4., ISBN 963 661 713 9.
  144. Dudás, I., Balajti Zs.: Mathematical model for analysing helicoid surfaces having the same axis, microCAD 2007. International Scientific Conference, Section L: Production Engineering and
    Manufacturing Systems, Miskolc, 22-23. March 2007.,, pp. 1-6.,
    ISBN 978-963-661-742-4 Ö, 978-963-661-753-0.
  145. Varga, Gy., Dudás, I.: 3D Topography for Drilled Surfaces, Proceedings of ISMTII 2007, the 8th International Symposium on Measurement Technology and Intelligent Instrum, September 24-27, 2007, pp.:429-432, 2007
  146. Dudás, I., Lierath, F., Balajti, Zs.: Analysis of the Production Process of the Arched Worm Profil, 12th International Conference on Tools, University of Miskolc,Hungary, 6-8. September 2007. pp.: 169-174., ISSN 1215-0851, 2007
  147. Dudás, I., Varga, Gy.: CCD Camera Measurements for the Examination of Wear of Cutting Tools, Proceedings of ISMTII 2007, the 8th International Symposium on Measurement Technology and Intelligent Instrum, September 24-27, 2007, pp.: 301-304.
  148. Dudás, I., Varga, Gy.: CCD Camera Measurements for the Examination of Wear of Cutting Tools, Proceedings of ISMTII 2007, the 8th International Symposium on Measurement Technology and Intelligent Instrum, September 24-27, 2007, pp.: 301-304
  149. Balajti, Zs., Dudás, I.: Determination of the Wheel Profile in Explicit Form, 12-th International Conference on Tools, University of Miskolc, Hungary, 6-8. September 2007. pp. 181-185., ISSN 1215-0851, 2007
  150. Balajti, Zs., Dudás, I.: Practical Application Of The Monge Projection In The Production Process, microCAD 2008. p. 9-16. Miskolc, Egyetemváros, Hungary
  151. Dudás, I., Balajti, Zs: Analysis Of The Production Process Of The Arched Worm Profil, microCAD 2008 p. 41-46., Miskolc, Egyetemváros, Hungary
  152. Varga, Gy., Dudas, I., Szigeti, F., Kovacs, A., Yagi, H.: Examination of Cutting Tool Wear, microCAD 2008, International Scientific Conference, Section N, Production Engineering and Manufacturing Systems, Miskolc, March 20-21, 2008, pp.: 185-190, ISBN 978-963-661-812-4, Ö, ISBN 978-963-661-823-0
  153. Dudás, I., Dezső, G.: Physical Modeling The Contact Problem Of A Worm Gear Drive, microCAD 2008 p.47-52. Miskolc, Egyetemváros, Hungary
  154. Dudás, I.: Computer Aided    Engineering Development  of Up-To-Date Worm Gear Drives. COMEG 2008. Santa- Clara, Kuba
  155. Balajti, Zs., Dudás, I.: New Model for the Production Geometrical Analysis of Spatial Drives, microCAD 2006. International Scientific Conference Miskolc, 16-17. March 2006., pp. 1-4., ISBN 963 661 713 9.
  156. Balajti, Zs., Dudás, I.: Mathematical model for analysing helicoid surfaces having the same axis, microCAD 2007. International Scientific Conference, Section L: Production Engineering and Manufacturing Systems, Miskolc, 22-23. March 2007.,, pp. 1-6., ISBN 978-963-661-742-4 Ö, 978-963-661-753-0.
  157. Balajti, Zs., Dudás, I.: Determination of the Wheel Profile in explicit Hungary, 6-8. September 2007. pp. 181-185.
  158. Balajti, Zs., Dudás, I.: Practical Application of the Monge Projection in the Production Process, microCAD 2008. International Scientific Conference, Section L: Production Engineering and Manufacturing Systems, Miskolc, 20-21. March 2007., pp. 9-16., ISBN 978-963-661-742-4 Ö,978-963-661-7530.
  159. Dudás, I., Balajti, Zs.: Analisys of the production Process of the arched Worm Profil, microCAD 2008. International Scientific Conference, Section L: Production Engineering and Manufacturing Systems, Miskolc, 20-21. March 2007., pp. 41-46., ISBN 978-963-
    661-742-4 Ö, 978-963-661-753-0.
  160. Balajti, Zs., Dudás, I.: Up to date method for describing the bearing pattern of spiroid driving, International Conference, Moszkva, 2009.
  161. Dudás, I., Varga, Gy.: Examination of drilling manufacturing operation made by environmentally, Proceedings of ISMTII 2009, Saint Petersburg
  162. Dudás, I., Varga, Gy.: Measurements os sophisticated surface pairs in holonic manufacturing system, Proceedings of ISMTII 2009, Saint Petersburg
  163. Bodzás, S., Dudás, I.: Modern quality assurance of spiroid worm, Factory Automation 2010, Kecskeméti Főiskola GAMF Kar, Kecskemét, 2010.04.15. – 2010.04.16., pp.: 139 – 144., ISBN 978-963-7294-83-9
  164. Monostori, R., Dudás, I.:, Measurement techniques of shaping surfaces, Factory Automation 2010, Kecskeméti Főiskola GAMF Kar, Kecskemét, 2010.04.15. – 2010.04.16., pp.: 127 – 134., ISBN 978-963-7294-83-9
  165. Dezső, G., Dudás, I., Péter, L., Bodzás S.: Multicontast problem of spiroid worm gear drives, microCAD International Scientific Conference, Miskolci Egyetem Innovációs és Technológia Transzfer Centrum, Miskolc, 2011.03.31 – 2011.04.01., pp.: 47 – 52., ISBN 978-963-661-965-7
  166. Bodzás S., Dudás, I.: Production geometry and finite element method analisys of archimedean worm gear drive, XXV. microCAD International Scientific Conference, Miskolci Egyetem Innovációs és Technológia Transzfer Centrum, Miskolc, 03.31 – 2011.04.01., pp.: 29 – 34., ISBN 978-963-661-965-7
  167. Bodzás S., Dudás, I., Péter, L., Dezső, G., Kósa P., Százvai A.: Rapid prototyping production of conical worm with arched profile, XXV. microCAD International Scientific Conference, Miskolci Egyetem Innovációs és Technológia Transzfer Centrum, Miskolc, 03.31 – 2011.04.01., pp.: 35 – 40. (ISBN 978-963-661-965-7)
  168. Mándy, Z., Dudás, I.: The aggregation approach of Holonic Manufacturing Systems, XXV. microCAD International Scientific Conference, Miskolci Egyetem Innovációs és Technológia Transzfer Centrum, Miskolc, 03.31 – 2011.04.01., pp.: 133 – 138. (ISBN 978-963-661-965-7)
  169. Bodzás, S., Dudás, I.: Analysis of the grinding territory of worm gear hob, International Multidisciplinary Conference 2011 9th Edition Proceedings, Bessenyei Publishing House, Nyíregyháza, 2011.05.19 – 2011.05.21., pp.: 61 – 66., ISBN 978-615-50-97-18-8
  170. Mándy, Z., Dudás, I., Bodzás, S.: Manufacture of spiroid worm surfaces in modern intelligent integrated systems, Factory Automation Conference 2011, Széchenyi István Egyetem, Győr, 2011.05.24 – 2011.05.26., pp.: 140 – 147., ISBN 978-963-7175-3
  171. Bodzás, S., Dudás, I.,: Modeling and mathematical analysis of conical helical surface, Annals of MTeM for 2011 and Proceedings of the 10th International Conference Modern Technologies in Manufacturing, Cluj Napoca, Romania, 2011.10.05. -2011.10.07., pp.: 37- 40., ISBN 978-606-8372-02-0
  172. Dudás, I.,: General mathematical model for investigation of cylindrical and conical worms and hobs, Annals of MTeM for 2011 and Proceedings of the 10th International Conference Modern Technologies in Manufacturing, Cluj Napoca, Romania, 2011.10.05. -2011.10.07., pp.: 103 – 107., ISBN 978-606-8372-02-0
  173. Bodzás, S., Dudás, : Designing and modelling of worm gear hob, Doktoranduszok Fóruma, Miskolci Egyetem Tudományszervezési és Nemzetközi Osztály, Miskolc, 2011.11.08., pp.: 12 – 17.
  174. Dudás, I., Bodzás, S.: Modeling and prototyping production of conical face gear hob, Proceedings of the 13th International Conference of Tools ICT 2012, Miskolc, 2012.03.27 – 2012.03.28., pp.: 339 – 345., ISBN 978-963-9988-35-4
  175. Dudás, I.: Manufacture of helicoidal surfaces in modern intelligent integrated systems, Proceedings of the 13th International Conference of Tools ICT 2012, Miskolc, 2012.03.27 – 2012.03.28., pp.: 333 – 339. ISBN 978-963-9988-35-4
  176. Dudás, I., Mándy, Z.: The theory of the grinding wheel dressing with kinematical analysis, Proceedings of the 13th International Conference of Tools ICT 2012, Miskolc, 2012.03.27 – 2012.03.28., pp.: 345 – 351., ISBN 978-963-9988-35-4
  177. Bodzás, S., Dudás, I.: Mathematical generation and modeling of face gear surface, The Publications of the microCAD International Scientific Conference CD, Miskolci Egyetem, Miskolc, 2012.03.29 – 2012.03.30., ISBN 978-963-661-773-8
  178. Mándy, Z., Dudás, I.: The mathematical basis of grinding wheel regulation, The Publications of the microCAD International Scientific Conference CD, Miskolci Egyetem, Miskolc, 2012.03.29 – 2012.03.30., ISBN 978-963-661-773-8
  179. Bodzás, S., Dudás, I.: Defining of the resharpening territory of the new type spiroid face gear having arched profile by analytic calculations, International Multidisciplinary Conference 2013 10th Edition Proceedings, Bessenyei Publishing House, Nyíregyháza, 2013.05.22. – 2013.05.24., pp.: 29 – 34., ISBN 978-615-5097-66-9
  180. Dudás, I., Bodzás, S.: The analysis of cutting edges of face gear hob with analytical calculation and three coordinate measuring machine, 11th International Symposium on Measurement Technology and Intelligent Instruments, ISMTII 2013, 2013. 07.01. – 2013. 07. 05., Aachen, Németország, pp. 30. (abstract), Terjedelem: 6 oldal, Guide to Selected Topics pp. 22., ISBN 978-3-86359-138-0
  181. Dudás, I., Monostori, R.: Analysis of a big joint implant, 11th International Symposium on Measurement Technology and Intelligent Instruments, ISMTII 2013, 2013. 07.01. – 2013. 07. 05., Aachen, Németország, pp. 73. (abstract), Terjedelem: 6 oldal, Guide to Selected Topics pp. 22., ISBN 978-3-86359-138-0
  182. Bodzás, S., Dudás, I.: The geometric controlling of a new type spiroid worm shaft by three coordinate measuring machine, Annals of MTeM for 2013 and Proceedings of the 11th International Conference Modern Technologies in Manufacturing, Cluj Napoca, Romania, 2013.10.17. – 2013.10.19., pp.: 5 – 11., ISBN 973-9087-53-1
  183. Bodzás, S., Dudás, I.: Production technology of spiroid worm surface using grinding wheel banking angle correction, The Publications of the MultiScience – microCAD International Multidisciplinary Scientific Conference CD, Miskolci Egyetem, Miskolc, 2014. 04. 10 – 2014. 04. 11., ISBN 978-963-358-051-6
  184. Dudás, I., Bodzás, S.: The production geometric analysis of the new type, spiroid worm gear drive having arched profile, ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: DETC2013, Portland, Amerikai Egyesült Államok (USA), 2013.08.04-2013.08.07, New York: American Socety of Mechanical Engineers (ASME), 2013, ISBN 978-0-7918-5597-3

Nemzetközi idegen nyelvű konferencia nem lektorált kiadványa

  1. Dudás I.: Herstellung von Helikoidoberflächen und ihrer Werkzeuge im CIM-SYSTEM MicroCAD-SYSTEM’92 Miskolc, Ungarn, 02. 25-29. pp.: II./43l-436.
  2. Dudás I., Berta, M., Cser, T.: The Trends of the Development and the Application of Computer Aided Production Process Planning MicroCAD-SYSTEM ’93 Kassa, 1993. november
  3. Dudás I. – Berta, M. – Cser, I.: The Problems and the State of the Department and the Application of Computer Aided Manufacturing Process Planning MicroCAD-SYSTEM’93, KHARKOV 8-13. June 1993. pp.: 67-76.
  4. Dudás I. – Berta M. – Cser, I.: The Trends of the Development and the Application of Computer Aided Production Process Planning International Conference MicroCAD Miskolc, 2. March 1994. pp.: 13-19.
  5. Dudás I.: Profiling devices of grinding wheel for geometrically correct manufacturing of helicoid surfaces microCAD’94, Miskolc, 3. March 1994, pp.: 106-112.
  6. Dudás I.: Continuous regulation of profiled grinding Wheels MicroCAD’94 International Computer Science Conference, Kharkow 3-5. May. 1994. pp.: 16-18.
  7. Dudás I. – Csermely Varga Gy.: Digital Metrology of Drilling Experiments MicroCAD‘95 International Computer Science Conference 23. February, 1995, Section F, Miskolc-Egyetemváros, pp.: 35-39.
  8. Dudás I.: Grinding Possibilities of Conical Worm of Spiroid Driving Pairs International Computer Science Conference (MicroCAD’96) Miskolci Egyetem, Miskolc-Egyetemváros, l996. február 29., pp.: 33-38.
  9. Dudás I. – Csermely T.: Anwendung von digitaler Meßtechnik im Qualitätssicherung International Computer Science Conference (MicroCAD’96) Miskolci Egyetem, Miskolc-Egyetemváros, l996. február 29., pp.: 85-90.
  10. Dudás I. – Csermely T.: Computergestützte Qualitätssicherung MicroCAD’97 International Computer Science Conference Miskolc-Egyetemváros, 26-27. February, 1997, pp.: 81-84.
  11. Dudás I. – Bányai, K.: Analysis of Meshing of Worm Gearing by Simulation MicroCAD’97 International Computer Science Conference Miskolc-Egyetemváros, 26-27. February, 1997, pp.: 53-56.)
  12. Dudás I. – Varga Gy.: Possibilities for Measurement of Grinding Wheel Wear in Process by the Use of CCD Cameras MicroCAD’97 International Computer Science Conference Miskolc-Egyetemváros, 26-27. February, 1997, pp.: 73-76.
  13. Dudás I.: Expert Systems in the Production of Helicoid Surfaces, microCAD’98, February 25-26, 1998, Miskolc-Egyetemváros
  14. Dudás I. – Bányai K.: Planing of Optimum Mating of Helicoid Surfaces microCAD’98 February 25-26, 1998. Miskolc-Egyetemváros
  15. Dudás I. – Bányai K.: The Use of the Factorial Experiment Design at the Qualification of Worm Power Transmissions, microCAD’98 February 25-26., 1998 Miskolc-Egyetemváros
  16. Dudás I. – Leskó B. – Varga Gy.: Examination of Sliding Burnishing for External Cylindrical Surfaces, microCAD’98 February 25-26., 1998, Miskolc-Egyetemváros
  17. Dudás I. – Bányai K.: Design of the Production of the Spiroid Gearing microCAD’99 Nemzetközi Számítástechnikai Tudományos Konferencia Miskolc, 1999. február 24-25.
  18. Dudás I. – Csermely T: The Use of Electrical Metrology for Analysis of Features of Machine Tools microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia Miskolc, 2000. február 23-24. (Társszerző: Dr. Csermely Tibor)
  19. Dudás I. – Varga Gy.: The Use of CCD Cameras in Metrology microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia Miskolc, 2000. február 23-24.
  20. Dudás I. – Varga Gy.: Intelligent Manufacturing System for Productions of Sophisticated Surfaces microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia Miskolc, 2000. február 23-24.
  21. Dudás I. – Sztermenné Németh H.: The Use of CCD Cameras in Production Engineering microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia Miskolc, 2000. február 23-24.
  22. Dudás I. – Molnár G.: Application of Grinding Wheels Having One Lazer Grain for Production of Helicoid Surfaces microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia Miskolc, 2000. február 23-24.
  23. Dudás I.: Production of Transmission Driving Pairs in CIM-Systems MicroCAD 2001 International Scientific Conference, 1-2. March 2001, Univeristy of Miskolc. Miskolc, Hungary
  24. Dudás I. – K. J. Stout: The Application of Computers to the Analysis of Surfaces Produced in Production Processes MicroCAD 2001 International Scientific Conference, 1-2. March 2001, Univeristy of Miskolc. Miskolc, Hungary
  25. Dudás I. – Varga Gy.: Environmentally Friendly Lubrication MicroCAD 2001 International Scientific Conference, 1-2. March 2001, Univeristy of Miskolc. Miskolc, Hungary
  26. Dudás I. – Varga Gy.: Overview of the Literature of Production Systems MicroCAD 2001 International Scientific Conference, 1-2. March 2001, Univeristy of Miskolc. Miskolc, Hungary
  27. Dudás I. – Varga Gy: Metrological Use of CCD Cameras, MicroCAD 2001 International Scientific Conference 1-2. March 2001, Univeristy of Miskolc. Miskolc, Hungary
  28. Dudás I. – Csermely T.: The Role of the Development of Product and Production in the Quality Assurance MicroCAD 2001 International Scientific Conference 1-2. March 2001, Univeristy of Miskolc. Miskolc, Hungary
  29. Dudás I. – Bányai, K. – Balajti, Zs.: Up to Date Method for the Determination of the Grinding Wheels Profile, microCAD 2002 International Scientific Conference, 7-8. March 2002, University of Miskolc. Miskolc, Hungary
  30. Dudás I. – Varga Gy.: Finite Element Modelling of Chip Formation, 2003. march 06., MicroCad 2003 International Conference, University of Miskolc. Hungary
  31. Dudás I. – Varga Gy.: Tribological Aspects of Dry Machining, 2003. march 06., MicroCad 2003 International Conference, University of Miskolc, Hungary
  32. Dudás, I., Varga, Gy., Bányai, K.: Aspects of Holonic Manufacturing Systems, 2003. march 06., MicroCAD 2003 International Conference, University of Miskolc, Hungary
  33. Dudás I. – Csermely T.: CAQ Systeme von Maschinenbautechnologie, 2003. march 06., MicroCAD 2003 International Conference, University of Miskolc, Hungary
  34. Dudás I. – Gyenge Cs. – Berce, P.- Balc, N.: Rapid Prototyping Method by Lamination, 2003. march 06., MicroCAD 2003 International Conference, University of Miskolc, Hungary
  35. Dudás I. – Cser, I. – Varga Gy.: Modelling by Rapid Prototyping at the Department of Production Engineering of UM, 2003. march 06., MicroCad 2003 International Conference, University of Miskolc, Hungary
  36. Dudás I. – Bányai K.: AIternative Geometrical Dimensioning of Spiroid Drivings, 2003. march 06., MicroCAD 2003 International Conference, University of Miskolc, Hungary
  37. Dudás I. – Bányai,: Geometrical Development of Spiroid Drivings, microCAD 2003 International Scientific Conference 6-7. March 2003, University of Miskolc
  38. Dudás I. – Cser I. – Varga Gy.: Modelling by Rapid Prototyping at the Department of Production Engineering of UM, microCAD 2003 International Scientific Conference 6-7. March 2003, University of Miskolc, Hungary
  39. Dudás I. – Varga Gy.: Literature Survey for Finite Element Modelling of Chip Formation, microCAD 2003 International Scientific Conference 6-7. March 2003, University of Miskolc, Hungary
  40. Dudás I. – Csermely T.: Roles of Product and production Development in Quality Management, microCAD 2003 International Scientific Conference 6-7. March 2003, University of Miskolc, Hungary
  41. Dudás I. – Berce P. – Gyenge, Cs. – Varga Gy.: Együttműködés a kolozsvári és a miskolci egyetemek között a gyors prototipizálás területén, International Scientific Conference, IXth FMTÜ, Kolozsvár, Romania, 2004. március 26-27., pp.: 245-250, ISBN 973-8231-33-7
  42. Dudás I. – Varga Gy.: Környezetkímélő forgácsolási folyamatok modellezése, 12th International Conference in Mechanical Engineering, OGÉT 2004, Csíksomlyó, Romania, 2004. április 22-25., pp.: 65-70, ISBN 973-86097-9-8
  43. Dudás I.: Korszerű csigahajtások geometriai méretezése és végeselem analízise, 12th Conference in Mechanical Engineering, OGÉT 2004, Csíksomlyó, Romania, 2004. április 22-25., pp.: 65-70, ISBN 973-86097-9-8
  44. Dudás I. – Felhő Cs. – Nagy M. K. – Tóth G. – Szentesi A.: Geometriai modellek alkalmazása a Gyors- prototípus eljárásoknál, XI. Nemzetközi Gépész Találkozó, Románia, Kolozsvár, 2003. május 8-11., pp.: 58-64.
  45. Dudás I. – Felhő Cs. – Szentesi A. – Tóth G.: Kétkamerás térbeli méréstechnika, IX. FMTÜ, Nemzetközi Tudományos Konferencia, Románia, Kolozsvár, 2003. március 21-22. pp.: 1-8.
  46. Dudás I. – Bányai K.: Spiroid hajtások geometriai méretezés és végeselemes analízise, IX. FMTÜ, Nemzetközi Tudományos Konferencia, Romania, Kolozsvár, 2004. március 26-27., pp.:112-118., ISBN 973-8231-33-7
  47. Dudás I. – Tóth G.: Ívelt profilú csiga geometriai méretezése és végeselemes analízise, IX. FMTÜ, Nemzetközi Tudományos Konferencia, Romania, Kolozsvár, 2004. március 26-27., pp.:191-197., ISBN 973-8231-33-7
  48. Dudás I. – Felhő Cs. – Varga, Gy.: A Rapid-Prototyping eljárások orvosi alkalmazási lehetőségei, Fiatal Műszakiak Tudományos Üléssszaka X., Kolozsvár 2005. március18-19., FMTÜ-2005., pp.:279-286. ISBN 973-8231-44-2
  49. Dudás I. – Varga Gy.: The 5th International Scientific Conference, Development of Metal Cutting. DMC 2005, 12-13. 09. 2005., Kosice, Slovakia, ISBN 80-8073-303-1, EAN 9788080733032 pp. H26-H30.
  50. Dudás I. – Balajti Zs.: Térbeli hajtások hordképének elemzése, meghatározása. The 5th International Scientific Conference, Development of Metal Cutting DMC 2005, 12-13. 09. 2005., Kosice, Slovakia, ISBN 80-8073-303-1, EAN 9788080733032 pp.H31-H38.
  51. Dudás I. – Varga Gy. – Szigeti F. – Péter L. – Százvai A.: Furatmegmunkálás minimálkenéssel. Elektronikus Műszaki Füzetek, Magyar Tudományos Akadémia Debreceni Területi Bizottsága, Debreceni Akadémiai Bizottság Műszaki Szakbizottsága, Debrecen, 2006., 2. szám., pp.: 77-92.
  52. Dudás I.: Új geometriájú spiroid hajtások fejlesztése. Gépgyártás című folyóirat, XLVII. Évfolyam, 2007. 1. szám, pp.: 7-12.
  53. Dudás I. – Balajti Zs.: Analisys of the production Process of the arched Worm Profil, microCAD 2008. International Scientific Conference, Section L: Production Engineering and Manufacturing Systems, Miskolc, 20-21. March 2009.
  54. Dudás I. – Balajti Zs.: Analysis of Characteristic Curve in Case of the Wearing of the Grinding Wheel, microCAD 2009. International Scientific Conference, Section M: Production Engineering and Manufacturing Systems, Miskolc, 19 – 20. March 2009.
  55. Balajti Zs. – Dudás I.: Computer Aided Engineering Development of Tool Profile, International Multidisciplinari Conference 8th Editon, Baia Mare – Nyíregyháza, May 21-22, 2009.
  56. Bodzás S. – Bányai K. – Dudás I.: Worm gear drives measuring, Annals of MTeM for 2009 and Proceedings of the 9th International Conference Modern Technologies in Manufacturing, Cluj Napoca, Romania, 2009.10.08. -2009.10.10. pp.: 17 – 21. (ISBN 973-7937-07-04)
  57. Bodzás S. – Dudás I.: Analysis of production geometry of the hob for producing helical surfaces, Doktoranduszok Fóruma, Miskolci Egyetem Innovációs és Technológia Transzfer Centrum, Miskolc, 2009.11.05., pp.: 33 -39.
  58. Bodzás S. – Dudás I.: Modern Check up of Spiroid Worm, XXIV. microCAD International Scientific Conference, Miskolci Egyetem Innovációs és Technológia Transzfer Centrum, Miskolc, 2010.03.18. – 2010.03.20., pp.: 45 – 51. (ISBN 978-963-661-918-3)
  59. Monostori R. – Dudás I.: Measuring technikcal analysis of crown wheel, microCAD 2010 Proceedings of International Scientific Conference, Miskolci Egyetem Innovációs és Technológia Transzfer Centrum, Miskolc, 2010.03.18. – 2010.03.20., pp.: 129 – 134. (ISBN 978-963-661-918-3)
  60. Bodzás S. – Dudás I.: Backward turning of hob along logarithm spiral, IN-TECH 2010, Tisk AS, s.r.o., Jaromer, Prague, Czech Republic, 2010.09.14. – 2010.09.16., pp.: 255 – 257. (ISBN 978-80-904502-2-6)
  61. Monostori R. – Dudás I.: The process control of manufacturing systems, IN-TECH 2010 International Conference on Innovative Technologies, Prága, Cseh Köztársaság 2010. 09. 14-16. , pp.: 258-263. (ISBN 978-80-904502-2-6)
  62. Bodzás S. – Dudás I.: Defining of the maximum grinding angle of hobs by advancing method, Doktoranduszok Fóruma, Miskolci Egyetem Innovációs és Technológia Transzfer Centrum, Miskolc, 2010.11.10. pp.: 25 – 30.
  63. Bodzás S. – Dudás I.: Designing and modelling of worm gear hob, Doktoranduszok Fóruma, Miskolci Egyetem Tudományszervezési és Nemzetközi Osztály, Miskolc, 2011.11.08., pp.: 12 – 17.
  64. Dudás I. – Bodzás S.: Geometric analysis and mathematical modelling of spiroid worm, 10th International Symposium on Measurement Technology and Intelligent Instruments, ISMTII 2011, Daejeon, South Korea, http://www.ismtii2011.org/article/xml/sub/current.kin
  65. Bodzás S. – Dudás I. – Horváth R.: Measuring and analysis of noise level of spiroid worm gear drive, Doktoranduszok Fóruma, Miskolci Egyetem Tudományszervezési és Nemzetközi Osztály, Miskolc, 2012.11.08., pp.: 18 – 23.
  66. Bodzás S. – Dudás I.: Finite element method analysis of special conical transmission, The Publications of the XXVII. microCAD International Scientific Conference CD, Miskolci Egyetem, Miskolc, 2013.03.21 – 2013.03.22., ISBN 978-963-358-019-9
  67. Bodzás, S., Dudás, I.: Determination of contact curves of a new type conical gear drive, Proceedings of the 2nd International Scientific Conference on Advances in Mechanical Engineering, Debreceni Egyetem, Debrecen, 2014. 10. 08 – 2014. 10. 09., pp. 10-14, ISBN 978-963-473-751-3  http://www.eng.unideb.hu/userdir/gepesz/images/konf/ISCAME_conference_proceedings_2014.pdf

Magyar nyelvű konferencia lektorált kiadványa

  1. Dudás I.: Ívelt profilú csigahajtások gyártásgeometriai kérdései, IV. Fogaskerék Kollokvium 2/7. Budapest, 1981 V., pp.: 12-14.
  2. Dudás I.: Az érintkezési vonal és a burkoló szerszámfelület meghatározása csavarfelületek megmunkálásánál, V. Szerszám- és Szerszámanyag Konfe-rencia, Miskolc, 1982., pp.: II. 15/1-15/13.
  3. Dudás I.: Rugalmas gyártórendszerek kialakítása a szivattyúgyártásban, BMHK ’83. Miskolc, 1983. május 9. – június 13. GTE kiadvány p.: 5.
  4. Dudás I. – Bányai K., – Jávorkúti T.: Üregelő szerszámok számítógépes tervezése, BMKH ’83. Miskolc, 1983. május 9. – június 13. GTE kiadvány p.: 4.
  5. Dudás I.: Gondolatok a csigahajtás fejlesztéséről, 10. Szerszámgép Kollokvium, Budapest, 1983. október 2-4., Budapest, 1984. OMIKK, pp.: 207-212.
  6. Dudás I. – Jávorkúti T: Fogaskerék dörzsköszörülés alkalmazási kísérletei, BMKH ’84. rendezvényei, Miskolc, 1984. június 6-7., GTE kiadvány, pp.: 111-115.
  7. Dudás I. – Bányai K. -Dömötör, Z.-né, – Jávorkúti, T.: Szerszámtervezés VT 20/A számítógép alkalmazásával, BMKH ’84. Miskolc, l984. június 6. GTE kiadvány, pp.: 293-297.
  8. Dudás I. – Dömötör, Z.-né – Tóth K.: Számítógéppel segített gyártástervezés, BMKH ’84. Miskolc, 1984. június 6. GTE kiadvány, pp.: 279-303.
  9. Dudás I. – Fridrik L.: Új módszer a szerszámgeometria tervezésére, követelmények a szerszámgépekkel szemben, 10. Szerszámgép Kollokvium. Budapest, 1984. okt. 2-4., Budapest, 1984. OMIKK, pp.: 21-28.
  10. Dudás I. – Fridrik, L.: Spiroid hajtások szerszám- és gyártásgeometriájának elemzése, VI. SZASZ, Miskolc, 1985 aug. 27-29. Konferencia Kiadványa, 2. kötet, pp.: 124-136.
  11. Dudás I. –Fridrik, L. – Szabó, S.: Integrált gyártórendszerek szerszámellátása, VI. SZASZ, Miskolc, l985. aug. 27-29. Konferencia Kiadványa, 2. kötet, pp.: 3-21.
  12. Dudás I. – Jávorkúti, T.: Belső alakos felületek forgácsoló szerszámainak tervezése, VI. SZASZ, Miskolc, 1985 aug. 27-29. Konferencia Kiadványa, 2. kötet, 1985. pp.: 191-200.
  13. Dudás I. – Morvai K.: Edzett felületek esztergálása, fogazatok köszörülése szuperkemény szerszámokkal, VI. SZASZ, Miskolc, 1985. aug. 27-29. GTE Kiadvány, pp.: 579-590.
  14. Dudás I.: Papírnélküli gyár, új anyagok a jövő technológiai bázisai, Borsodi Műszaki Gazdasági Élet 1987/4. pp.: 22-24.
  15. Dudás I. – Less N.: Gyártórendszerek fejlődése gazdasági szempontok tükrében, XXIV. Borsodi Műszaki és Közgazdasági Hetek, l986. Gépgyártástechnológiai nap, Rugalmas gyártórendszerek, 1986. június 3. NME, BM, Élet 1988.
  16. Dudás I.: Gyorsacélszerszámok alkalmazása a forgácsoló megmunkálásoknál, Borsodi Műszaki Gazdasági Élet 1988/2. pp.: 26-29.
  17. Dudás I.: Csavarfelületek köszörülése, VII. Intergrind International Conference on Grinding Materials and Process, Budapest, 1988. XI. 15-17. Volume II. pp.: 384-396.
  18. Dudás I.: Sikeres szimpózium, Beszámoló a „VI. Szerszám és Szerszámanyag Szimpózium”-ról, Bp. Gépipar, 1988/4.
  19. Dudás I.: Elektrosalakos átolvasztással és különféle hőkezelési eljárással előállított kísérleti marószerszámok éltartamvizsgálata, VII. Nemzetközi Szerszám-konferencia és Kiállítás, Miskolc, 1989., I. köt. pp.: 157-166.
  20. Dudás, I.: Koordináta méréstechnika alkalmazása a csavarfelületek minősítésére, VII. Nemzetközi Szerszámkonferencia és Kiállítás, Miskolc, 1989, I. kötet, pp.: 146-156.
  21. Dudás I.: Helikoid felületek és szerszámaik előállítása CAD/CAM rendszerekben, 1989. 12. sz. pp.: 473-477.
  22. Dudás I.: CAD/CAM – a spiroid hajtások szerszám- és gyártásgeometriájának elemzése, X. MicroCAD – System ’91. Miskolc pp.: 17-24.
  23. Dudás I.: A számítógéppel segített technológiai tervezés VIII. Nemzetközi Szerszámkonferencia, Miskolc, 1993. aug. 30 – szept. 1.; pp.: 61-63. ISSN 1217-5927
  24. Dudás I.: Általános matematikai modell, valamint gyártórendszer a csavarfelületek előállítására VIII. Nemzetközi Szerszámkonferencia, Miskolc, 1993. aug. 30. – szept. 1. pp.: 64-72. ISSN 1217-5927
  25. Dudás I. – Csermely T. – Varga Gy.: Határozott élű szerszámokkal végzett kísérletek számítógépes méréstechnikája; VIII. Nemzetközi Szerszámkonferencia, Miskolc, 1993. aug 30. – szept. 1. pp.: 519-526.
  26. Dudás I.: Csavarfelületek geometriailag helyes előállításának új lehetőségei MTA Szabolcs-Szatmár-Bereg Megyei Tudományos Testületének Közleményei, 11. 1993. okt. 1-2. Nyíregyháza, p.: 61.
  27. Dudás I.: Csavarfelületek köszörülése A ME Gépgyártástechnológiai Tanszéke 1952-1992; ISSN 1217-5927, 1993. Miskolc, pp.: 34-37.
  28. Dudás I.: Általános matematikai modell, valamint gyártórendszer a csavarfelületek előállítására; A ME Gépgyártástechnológiai Tanszéke 1952-1992; ISSN 1217-5927, 1993. Miskolc, pp.: 64-72.
  29. Dudás I.: Környezetbarát fúrási technológiák; Erdélyi Magyar Műszaki Tudományos Társaság, OGÉT 95, Kolozsvár, 1995. április 8., pp.: 15-18.
  30. Dudás I. – Tisza M. – Voith M.: Gyártási folyamatok fejlesztésének tendenciái; ME fennállásának 260. évfordulóján rendezett Jubileumi Tudományos Konferencia – kari plenáris ülések 1995. szeptember 7.
  31. Dudás I.: Tendenciák a gépgyártás fejlesztésében; IV. Országos Gépészeti Találkozó, Szováta, Erdély, l996. április 12-14., pp.: 23-24.
  32. Dudás I. – Horváth M.- Szabó S.: Kontúresztergálás vizsgálata geometriai modellel IX. Nemzetközi Szerszámkonferencia; Miskolci Egyetem, Miskolc 1996. szeptember 3-5., pp.: 301-306.
  33. Dudás I.: Köszörűkorong kopás mérése CCD kamerával; A Magyar Tudományos Akadémia Szabolcs-Szatmár-Bereg Megyei Tudományos Testülete 1996. évi tudományos ülésén elhangzott előadások összefoglalói; Besenyei György Tanáképző Főiskola, Nyíregyháza, 1996. szeptember 28. p.: 146.
  34. Dudás I. – Bányai, K.: Spiroid hatjások fejlesztési irányai IX. Országos Gépész Találkozó Kolozsvár, 2001. április 26-29., pp.: 90-93.
  35. Bányai K. – Balajti Zs. – Dudás I.: Szerszámprofil analitikus meghatározása menetfelületek előállításához, Doktoranduszok fóruma, Miskolci Egyetem, Gépészmérnöki Kar Szekciókiadványa, 2001. November 6., 18-23 o.
  36. Dudás I.: A gépgyártás fejlesztésének tendenciái; X. Országos Gépész Találkozó, Székelyudvarhely, 2002. április 25-28., pp.: 24-29.
  37. Dudás I. – Bányai K.: Szerszámprofilok meghatározása csavarfelületekhez; X. Országos Gépész Találkozó, Székelyudvarhely, 2002. április 25-28., pp.: 59-62.
  38. Balajti Zs. – Bányai K. – Dudás I.: Csavarvonalakat tartalmazó alakzatok rekonstruálhatósága CCD kamerával készített képekből, Doktoranduszok fóruma, Miskolci Egyetem, Gépészmérnöki Kar Szekciókiadványa, 2003., 201-206 o.
  39. Balajti Zs. – Dudás I.: Új matematikai modell csavarfelületek elemzésére. XI. Fiatal Műszakiak Tudományos Ülésszaka, Kolozsvár, 2006. március 24-25., 23-26. o., ISBN 973-8231-50-7
  40. Balajti Zs. – Dudás I.: Csavarfelületek vizsgálata matematikai modellben. OGÉT, 2006. április 24. Szatmárnémeti
  41. Dudás I. – Lévai I.: Special Worm Gear Drives, FMTÜ, Kolozsvár, 2008. p.XXIII-XXX.ISBN 978-973-8231-75-7
  42. Dezső G. – Dudas I.: Finite Element Modelling Of Contact Problem Of Quasi-Static Working Of Worm Gear Drive, FMTÜ, Kolozsvár, p.65-68. ISBN 978-973-8231-75-7
  43. Dudás I. – Balajti Zs.: Analysis of Bearing Pattern With NewMathematical Model. FMTÜ, Kolozsvár,p.73-76. ISBN 978-973-8231-75-7
  44. Bodzás S. – Dudás I.: Csigakerekek megmunkálása és a megmunkáló szerszám köszörüléséhez szükséges maximális korongátmérő meghatározása, Gyártás 2010 „Manufacture” CD, MANUFACTURE-HU Nemzeti Technológiai Platform „GTENTP08” Szakmai Tanácsadó Testülete 2010, Budapest, 2010.10.20. – 2010.10.21., ISBN 978-963-9058-31-6
  45. Dudás I. – Bodzás S.: Spiroid csiga matematikai, geometriai modellezése és gyors prototípus gyártása, Multidiszciplináris Tudományok, 1. kötet, 1. szám, Miskolc, 2011. pp.: 159 – 167., HU ISSN 2062 – 9737
  46. Bodzás S. – Dudás I.: Új geometriájú spiroid csigahajtás és megmunkálószerszám gyors prototípusgyártása, XXII. Nemzetközi Gépész Találkozó, OGÉT 2014, Erdélyi Magyar Műszaki Tudományos Társaság (EMT) Kiadványa, Nagyszeben, Románia, 2014. 04. 24 – 2014. 04. 27., pp.: 54-58.
  47. Dudás I.: Új geometriájú spiroid csigahajtás tervezése és gyártása, XXII. Nemzetközi Gépész Találkozó, OGÉT 2014, Erdélyi Magyar Műszaki Tudományos Társaság (EMT) Kiadványa, Nagyszeben, Románia, 2014. 04. 24 – 2014. 04. 27., pp.: 111 – 155.
  48. Dudás, I.: A gyártástechnológia elemzésére alkalmas általános matematikai modell (promat), Nemzetközi Gépészeti Találkozó (OGÉT) 2015, 2015. 04. 23. – 2015. 04. 26., Csíksomlyó, Románia, pp. 84-88.
  49. Mándy, Z., Dudás, I.: A csavarfelületek megmunkálásánál fellépő menesztési hiba elemzése, Nemzetközi Gépészeti Találkozó (OGÉT) 2015, 2015. 04. 23. – 2015. 04. 26., Csíksomlyó, Románia, pp. 224-228.

Nemzetközi konferencia magyar nyelvű nem lektorált kiadványa

  1. Dudás I.: Fogazószerszámok fejlesztési tendenciái, Hengeres és kúpos lefejtőmarók gyártásgeometriai elemzése; VII. MicroCAD System, 1989. Miskolc, I. kötet pp.: 135-145.
  2. Dudás I.: CAD/CAM rendszer a csavarfelületek automatizált előállításában; MicroCAD, Miskolc, 1990. pp.: II. kötet /62-71.
  3. Dudás I. – Bányai K.: Csavarfelületek háromkoordinátás mérőgépen történő ellenőrzése, MicroCAD, Miskolc, 1991. pp.: VII. 3-9.
  4. Dudás I.: Helikoid felületek előállítása számítógépes integrált rendszerben; MicroCAD-SYSTEM’92. Nemzetközi Számítástechnikai Találkozó Miskolc, 1992. febr. 25-29. pp.: 431-437.
  5. Dudás I. – Berta M. – Cser I.: A számítógépes gyártástervezés fejlesztésének, alkalmazásának helyzete és problémái; MicroCAD-SYSTEM’93. Nemzetközi Számítástechnikai Találkozó Miskolc, 1993. március 02-06. pp.: 21-28.
  6. Dudás I.: CNC korongszabályozó készülék vizsgálata; MicroCAD-SYSTEM’93. Nemzetközi Számítástechnikai Találkozó, Miskolc, 1993. március 02-06.; pp.: 41-46.
  7. Dudás I. – Csermely T.: Számítógéppel segített méréstechnika alkalmazása minőségbiztosításban; MicroCAD’94. Miskolc, 3. March 1994, pp.: 38-44.
  8. Dudás I.: A Gépgyártás fejlesztésének tendenciái; Az MTA Szabolcs-Szatmár-Bereg Megyei Tudományos Testületének tudományos ülése, Nyíregyháza, p.: 92. 1995. szeptember 30.
  9. Dudás I. – Gádori A.: A termék- és gyártástervezés rendszerei a Gépgyártástechnológiai Tanszéken; International Computer Science Conference (MicroCAD’96); Miskolci Egyetem, Miskolc-Egyetemváros, l996. február 29. pp.: 69-74.
  10. Bodzás S. – Dudás I.: Lefejtőmaró gyártásgeometriai vizsgálata, Műszaki Tudomány az Észak Alföldi Régióban Konferencia 2010, Debreceni Akadémiai Bizottság Műszaki Szakkbizottsága, Nyíregyháza, 2010.05.19., www.mfk.unideb.hu/mszb/muszfuz, pp.: 187 – 193. (ISBN 978-963-7064-23-4)
  11. Monostori R. – Dudás I.: Statisztikai modell a furat gyártási hibái és helyzettűrése vonatkozásában, Műszaki Tudomány az Észak Alföldi Régióban 2010., Nyíregyháza, Hungary, 2010. május 19., pp.: 181-186., www.mfk.unideb.hu/mszb/muszfuz, (ISBN 978-963-7064-23-4)
  12. Dudás I. – Bodzás S.: Csigakerék lefejtőmaró élezhetőségi tartományának meghatározása közelítő módszerrel, XVI. Fiatal Műszakiak Tudományos Ülésszaka 2011, Erdélyi Múzeum Egyesület kiadványa, Kolozsvár, Románia, 2011.03.24 – 2011.03.25. pp.: 83-87., ISSN 2067-6 808
  13. Dudás I. – Bodzás S.: Spiroid csiga matematikai, geometriai modellezése és gyors prototípus gyártása, Miskolc, Műszaki Tudomány az Észak – Kelet Magyarországi Régióban 2011, Debreceni Akadémiai Bizottság Műszaki Szakkbizottsága, Debrecen, 2011.05.18., http://store1.digitalcity.eu.com/store/clients/release/mtekmr_2011.pdf, pp.: 215 – 220., ISBN 978-963-7064-25-8
  14. Bodzás S. – Dudás I.: Kúpos csigahajtás virtuális és gyors prototípus modellek előállítása, XVII. Fiatal Műszakiak Tudományos Ülésszaka 2012, Erdélyi Múzeum Egyesület kiadványa, Kolozsvár, Románia, 2012.03.22. – 2012.03.23. pp.: 63 – 67., ISSN 2067 – 6 808
  15. Bodzás S. – Dudás I.: Spiroid tányérkerék megmunkálószerszám hátraesztergálási görbéjének megválasztása, Miskolc, Műszaki Tudomány az Észak – Kelet Magyarországi Régióban 2012 Konferencia, Debreceni Akadémiai Bizottság Műszaki Szakkbizottsága, Szolnoki Főiskola, Szolnok, 2012.05.10., http://store1.digitalcity.eu.com/store/clients/release/mtekmr_2012.pdf, pp.: 181-191., ISBN 978-963-7064-28-9
  16. Bodzás S. – Dudás I.: Kúpfelületű csigakerék lefejtőszerszám gyors prototípusgyártása, V. Nyíregyházi Doktorandusz (PhD/DLA) Konferencia Kiadványa, CD, Nyíregyházi Főiskola, Nyíregyháza, 2012. 12.04., pp.: 38-41., ISBN 978-963-9909-9
  17. Bodzás S. – Dudás I. – Horváth R.: Kúpos csigahajtómű zajszintjének vizsgálata, A VI. Nyíregyházi Doktorandusz (PhD/DLA) Konferencia Kiadványa, Szent Atanáz Görögkatolikus Hittudományi Főiskola, Nyíregyházi Főiskola, Debreceni Egyetem Egészségügyi Kara, Nyíregyháza, 2013., pp.: 9-14., ISBN 978-615-5073-18-2
  18. Bodzás S. – Dudás I.: Kúpos csavarfelületek geometriailag helyes megmunkálásához szükséges kinematikai modell, XIX. Fiatal Műszakiak Tudományos Ülésszaka 2014, Erdélyi Múzeum Egyesület kiadványa, Kolozsvár, Románia, 2014.03.20. – 2014.03.21. pp.: 93 – 96., ISSN 2067 – 6 808
  19. Bodzás S. – Dudás I.: Tengelymetszetben körív profilú kúpos csigatengely profilkialakításának elemzése, VII. Nyíregyházi Doktorandusz Konferencia (PhD/DLA) Konferencia Kiadványa, Szent Atanáz Görögkatolikus Hittudományi Főiskola, Nyíregyházi Főiskola, Debreceni Egyetem Egészségügyi Kar, Nyíregyháza, 2014., pp.: 10-19., ISBN 978-963-318-419-6
  20. Bodzás, S., Dudás, I.: Spiroid lefejtőmaró elemzése és végeselem vizsgálata, Műszaki Tudomány az Észak – Kelet Magyarországi Régióban 2014 Konferencia, Debreceni Akadémiai Bizottság Műszaki Szakbizottsága, Nemzeti Közszolgálati Egyetem, Hadtudományi és Honvédtisztképző Kar, Katonai Üzemeltetői Intézet, Szolnok, 2014.05.13., pp. 374-389., ISBN 978-963-508-752-5, http://store1.digitalcity.eu.com/store/clients/release/mtekmr_2014.pdf

Egyéb (népszerűsítő) publikációk

  1. Dudás, I.: Preface; A ME Gépgyártástechnológiai Tanszéke 1952-1992; ISSN 1217-5927, 1993. Miskolc, p.: 4. g)
  2. Dudás, I.: Vorwort; A ME Gépgyártástechnológiai Tanszéke 1952-1992; ISSN 1217-5927, 1993. Miskolc, p.: 5.
  3. Dudás, I.: Előszó; A ME Gépgyártástechnológiai Tanszéke 1952-1992; ISSN 1217-5927 1993. Miskolc, p.: 3.
  4. Dudás, I.: Előszó VIII. Nemzetközi Szerszámkonferencia, Miskolc, Miskolci Egyetem; 1993. aug. 30. – szept. 1. , pp.: III – IV., ISBN 963 661 215 3
  5. Dudás, I.: Sikeres nemzetközi szerszámkonferencia Miskolcon; Gépipar 1994. 1-2., p.: 12
  6. Dudás, I.: Preface; „GÉP” – Society of Mechanical Engineering 1996/10, Miskolc, p.: 3.
  7. Dudás, I.: Előszó; Emlékfüzet Bálint Lajos egyetemi tanárról és Fridrik László egyetemi docensről, a Gépgyártástechnológiai Tanszék egykori vezetőiről 1996. szeptember; p.: 3.
  8. Dudás, I.: Emlékbeszéd; Emlékfüzet Bálint Lajos egyetemi tanárról és Fridrik László egyetemi docensről, a Gépgyártástechnológiai Tanszék egykori vezetőiről 1996. szeptember, pp.: 4-6.
  9. Dudás, I.: PREFACE; Fourth International Symposium on Measurement Technology and Intelligent Instruments; Miskolc, Lillafüred, Hungary, Sept. 2-4., 1998. pp.: XV-XVI.
  10. Dudás, I.: Előszó; IX. Nemzetközi Szerszámkonferencia Miskolci Egyetem; Miskolc 1996. szeptember 3-5.; pp.: V., ISBN: 963 661 279 X (Társszerző: Lierath, F.)
  11. Dudás, I.: Előszó; X. Nemzetközi Szerszámkonferencia; Miskolc, MAB Székház; 2000. szeptember 6-8., pp.: XI-XII., ISBN 963 661 434 2